FINNED TUBE HEAT EXCHANGERS
They serve for heat transfer in accumulation tanks. They are made of finned copper tubes that offer larger tube surface and better
heat transfer. They differ in the size of their heat transfer surfaces, in their length, connecting size, kind of winding and in the number
of tubes. Upon agreement, in case of large quantities demanded, also tailor-made types can be manufactured.
| Code |
Surface
(m2) |
Coil
length
(mm) |
Coil
diameter
(mm) |
Connection |
Number of tubes |
| 6150 |
0,6 |
410 |
145 |
3/4" |
1 |
| 6151 |
1,06 |
420 |
145 |
3/4" |
1 |
| 6152 |
1,8 |
470 |
170 |
3/4" |
1 |
| 6154 |
2,63 |
600 |
190 |
3/4" |
1 |
| 6157 |
3,15 |
560 |
185 |
1" |
2 |
| 6155 |
3,6 |
630 |
190 |
1" |
2 |
| 6156 |
4,5 |
750 |
190 |
1" |
2 |
|
|
FINNED TUBE HEAT EXCHANGERS
FOR RBC TANKS
Designed to transfer heat in RBC and
R2BC tanks, they are made of finned copper tubes that
offer larger tube surface and better heat transfer. The
lower flange of a tank is ready to accept them. These
heat exchangers are nickel-plated, i.e. suitable for DHW
heating.
| Code |
Surface
(m2) |
Coil
length
(mm) |
Coil
diameter
(mm) |
Connection |
Number of tubes |
| 8377 |
0,94 |
400 |
110 |
3/4" |
1 |
| 8378 |
1,51 |
700 |
110 |
3/4" |
1 |
|
- max. working pressure 10 bar
- max. working temperature 95°C
|
Flanges for fitting heat exchangers into PS2F accumulation tanks.
 |
 |
 |
| blind flange |
3/4“ size |
1" size |
| code: 6230 |
code: 6231 |
code: 6232 |
Flanges for
RBC and R2BC tanks.
|
Not supplied with accumulation tanks; please order separately
with respect to
the intended use of your tank.
Tanks are supplied with a blind flange
|
G 3/4“ size
code 8375
|
to install another heating element
with G 6/4“ thread
code 8376
|
BRASS FITTINGS FOR CONNECTING TANKS
| code |
name |
thread |
| 7881 |
plug |
G 6/4“ |
| 7627 |
coupling |
G 6/4“ × 5/4“ M/M |
| 8767 |
coupling |
G 6/4“ × 1“ M/F |
| 8766 |
coupling |
G 6/4“ × 1“ M/M |
| 7882 |
coupling |
G 6/4“ × 6/4“ M/M |
| 8270 |
coupling |
G 3/4“ × 5/4“ M/M |
|
9078 |
nickel-plated pocket, 100 mm |
G 1/2“ M |
|
  |
WATERSOFT - A DEVICE FOR ELECTROMAGNETIC WATER TREATMENT
|
A device for electromagnetic treatment of calcium containing water without chemical additives. It prevents scale formation and
dissolves existing deposits. It is especially suitable for treating water for appliances with thermally stressed spots (heat exchangers
in boiler, storage water heaters, washing machines...). Its advantage is an easy and quick installation without plumber‘s intervention
and minimum running costs (2 W of el. energy consumption, no chemicals).
|
| Operation indication |
green LED is flashing |
| Power input |
2W max. |
| IP protection |
IP 65 |
| Max. pipe diameter |
6/4" |
| Max. water flow rate |
4m3/h |
| Code |
3044 |
|
ACES - ANTICORROSION ELECTRONIC SYSTEM (Electronic Anode)
|
Aces generates a weak direct current that keeps an optimum potential between its titanium electrode and the
heater‘s mantle. Thus the heater is protected against possible corrosion. The appliance continuously measures the value of this potential and
modifies it immediately when needed and keeps it on an optimum level. It does not wear off, needs no maintenance and extends
the lifetime of storage water heaters.
|
| Type |
Length |
Thread |
Code |
| ACES 200/250 |
450 mm |
1/2" |
4052 |
| ACES 350/250 |
650 mm |
1/2" |
3836 |
|
Instalation and Operational Manual for
ACES
THERMOSTATIC MIXING VALVE
MT52 - Thermostatic valve for DHW, 30-70°C, 1" M
Valve housing and inner components are made of
brass with protection against corrosion and scale.
Gasket: EPDM |
Code: 6726 |
MT52HC - Thermostatic valve for DHW for high flow
rates, 20-70°C, 5/4" M
- Max. working temperature: 90°C
-
Max. working pressure: 10 bar
-
Valve housing material: brass
-
Inner components material: brass
-
Gaskets material: EPDM, NBR
-
Housing with a protective layer against scale
sediments
-
Dynamic working pressure: 0.5-5 bar
-
Max. inlet pressure difference: 2 bar
-
Range of continuously regulated temperatures:
20-70°C
-
Temperature stability of mixed water: 4 K max. (at
hot water temp. change of 20 K)
-
Noise level: class 2
-
Mounting position: any
-
Spring safety closure for case of cold water supply
failure (for mixed water temp. of 40°C)
-
Weight: 0.9 kg
-
Special function: can be used as a diverter valve (reversed
water flow)
|
Code: 7079 |
|
