DESCALING PUMPS:
|
DOS 25 V4V serves for removing scale
from sanitary water heat exchangers, heating
circuits, storage water heaters, boilers
etc. The pump is equipped with a 4-way valve
enabling reverse flow of the descaling
liquid and thus better results in cleaning.
TARTARUGA V4V is a lighter and easily
portable pump for less demanding
applications. It is also equipped with a
4-way valve enabling reverse flow of the
descaling liquid.
|
 |
 |
| Technical parameters |
DOS V4V |
TARTARUGA V4V |
| tank volume |
20 liters |
5 liters |
| flow rate |
max. 56 l/min |
18 l/min |
| connection |
1/2″ |
1/2″ |
| power supply |
230V / 50Hz |
230V / 50Hz |
| pump type |
rotary,
230V/50Hz, 165W |
rotary,
230V/50Hz, 50W |
| dimensions h x w x l |
500 x 355 x 355
(mm) |
350 x 330 x 330
(mm) |
| weight |
about 6 kg |
4.7 kg |
| code |
590 |
5990 |
|
CHEMICALS FOR DISCALING PUMPS
| CLEANING
AGENTS: |
Code |
DETEX - intended for cleaning copper and
steel parts. Solution: 1 kg Detex for 6-10 l
of water. |
649 |
|
MANTEX SP - for cleaning components in
stainless-steel, copper and tin. Dissolve 1
kg Mantex in 6 l water. |
650 |
|
MANTEX SNO - for cleaning aluminum or
light alloy parts. |
2134 |
| NEUTRALIZATION
AGENTS: |
Code |
|
N105 - liquid for neutralization of
residual acidity after cleaning. |
4006 |
|
pH METR - a digital tester helps in
checking the acidity of descaling solutions,
range 0-14 pH, accuracy ±0.2 pH, suitable
for all current measurements of acid
solutions. The measured value is shown
within seconds, the battery will last for
some 700 hours of continuous measurement. |
652 |
|
|
FIRE-SIDE BOILER
CLEANING PRODUCTS
|
GAS-FIRED BOILERS: |
Code |
|
METANOTHERM - liquid combustion deposit
remover. Its chemical reaction will clean
heat transfer surfaces that cannot be
reached by manual cleaning methods. It is
especially suitable for cleaning
gas-to-water heat exchangers in wall-hung
boilers. Supplied as a spray or in 10-l
plastic cans. |
spray:
|
1977 |
| 10-l plastic
can: |
424 |
|
OIL-FIRED BOILERS: |
Code |
|
EC-MIX - non-toxic powder combustion
deposit remover for oil-fired boilers. It is
introduced into the combustion chamberand
after the boiler is fired, the combustion
chamber and all the heat transfer surfaces
will be cleaned. |
1368 |
|
|
LIQUIDS FOR CLEANING AND PROTECTION
|
HEATING SYSTEMS: |
Code |
|
MR 501/R - concentrated alkalic scale
dissolving corrosion inhibitor for heating
systems. The dislodged scale and other
impurities are purged by flushing the system
2 to 3 weeks after its application.
Concentration: 2 kg M501/R for 80-100 l
water. |
433 |
MR 501/F and MR 501/96P - give
preventive corrosion protection by forming a
protective film on the surface. They are
mixable with anti-freeze liquids (e.g. for
solar systems). Older heating systems should
be cleansed prior to the application by
using MR 501/R liquid first.
MR 501/F - gives preventive corrosion
protection to metal materials (iron, copper,
aluminum etc.) and their alloys. 1 kg M501/F
shall be diluted in 100 l water.
MR 501/96P - is intended esp. for
heating systems containing plastic
components (e.g. underfloor heating). It
prevents algae growth and gas formation. 1
kg M501/96P shall be diluted in 100 l water. |
M 501/F: |
434 |
| MR - 501/96P |
4402 |
|
CORROSION PREVENTION: |
Code |
ZINCOL spray for cold zinc spraying. An
excellent surface finish and corrosion
protection. Thanks to high
zinc content (95%) the coating never peels
off, and the surface can be sprayed without
any special pretreatment |
428 |
|
