Heat pumps and solar systems

• Enameled DHW storage tanks - R0BC
• Enameled storage water heaters - RBC
• Enameled storage water heaters with enlarged heating coil - RBC HP
• Storage water heater with two enameled heating coils - R2BC
• Storage water heater with one enameled heating coils - RGC
• Storage water heater with two enameled heating coils - R2GC
• Stainless-steel storage water heaters - NBC
• Stainless-steel storage water heaters - N2BC
• Accessories

Max. work. press. 10 [bar]
Max. work. temp. 95 °C

Storage tanks enabling installation of an electric heating element. Their inner surface is enameled in compliance with DIN 4753.

They are equipped with a magnesium anode rod. The tanks are supplied with hard PUR insulation 50 mm thick (200 to 500 l tanks) or 70 mm thick (750 and 1000 l tanks), with white PVC surface.

The insulation can be removed (e.g. for passing through a narrow door).

max. work. press. 10[bar]
max. work. temp. 95°C

Storage water heaters with 1 enameled coils, enabling installation of an electric heating element. Their inner surface is enameled in compliance with DIN 4753. They are equipped with a magnesium anode rod.

The tanks are supplied with hard PUR insulation 50 mm thick (200 to 500 l tanks) or 70 mm thick (750 and 1000 l tanks), with white PVC surface. The insulation can be removed (e.g. for passing through a narrow door).

Volumes up to 5000 l on request.

Instalation and Operational Manual for Storage Water Heaters RBC

Max. work. press. 10 [bar]

Max. work. temp. 95 °C

Storage water heaters with enlarged heat transfer surface of the heating coil, suitable for water heating from low-temperature sources (heat pumps, large solar systems etc.). Up to 750 l volume, the tank can be fitted with an electric heating element. Their inner surface is enameled in compliance with DIN 4753.

The tanks are equipped with a magnesium anode rod. The tanks are supplied with hard PUR insulation 50 mm thick (200 to 500 l tanks) or 70 mm thick (750 and 1000 l tanks), with white PVC surface. The insulation can be removed (e.g. for passing through a narrow door).

max. work. press 10 [bar]

max. working temp. 95°C

They are equipped with a magnesium anode rod. The tanks are supplied with hard PUR insulation 50 mm thick (200 to 500 l tanks) or 70 mm thick (750 and 1000 l tanks), with white PVC surface. The insulation can be removed (e.g. for passing through a narrow door).

Volumes up to 5000 l on request. 

max. work. press. 6 [bar]

max. working temp. 95°C

Storage water heaters with 1 enameled coil, enabling installation of an electric heating element. Their inner surface is enameled in compliance with DIN 4753.

• They are equipped with a magnesium anode rod.
• The tanks are supplied with hard PUR insulation 55 mm thick (200 to 300 l tanks) or 50 mm thick (400 l tanks), with white leatherette surface.
• The insulation cannot be removed.

  Users Manual for RGC Storage water heater

max. working press. 6 [bar]

max. working temp. 95°C

Storage water heaters with 1 or 2 enameled coils, enabling installation of an electric heating element. Their inner surface is enameled in compliance with DIN 4753.

• They are equipped with a magnesium anode rod. 
• The tanks are supplied with hard PUR insulation 55 mm thick (200 to 300 l tanks) or 50 mm thick (400 l tanks), with white leatherette surface.
  
• The insulation cannot be removed.  

Storage tanks with one heating coils, enabling installation of an electric heating element (an element designed for stainless-steel tanks shall be used).

The tanks are made of AISI 316 L stainless steel, fitted with an electronic anode rod.

The tanks are supplied with hard PUR insulation 50 mm thick with white PVC surface.

Storage tanks with two heating coils, enabling installation of an electric heating element (an element designed for stainless-steel tanks shall be used).

The tanks are made of AISI 316 L stainless steel, fitted with an electronic anode rod.

The tanks are supplied with hard PUR insulation 50 mm thick with white PVC surface.