Kombiflex
Kombiflex pipes are made of stainless steel, easily shapeable, intended for fixed connections. Once installed, neither the pipe nor its connections may be under any strain. Elbow section can be easily substituted by a bend in the pipe (the min. radius shall be respected). Pipes are sold by meter (coils of 2, 4 or even more meters) and cut to the desired length on the spot using special tooling supplied in a toolbox. In order to secure sufficient tightness, only fittings with large sealing surface (wall thickness) can be used with Kombiflex – see the table of fittings supplied. During installation the instructions in the manual shall be followed meticulously, sticking to the description and pictures.
GAS: Kombiflex is designed to facilitate connecting gas appliances and/or repair or replacement of damaged piping. Gas pipes may be installed exclusively by contractors authorized to deal with gas appliances. Only approved nuts and gaskets may be used for installation.
WATER: Kombiflex is designed to be used in pressure piping for potable and sanitary water (it is attested for potable water). It is suitable for connecting storage water heaters, boilers, radiators, sanitary valves, dishwashers and anywhere else where quick installation and flexibility is an advantage.
Related articles
- Instructions for Kombiflex
| Code | Name | |
| 3713 | DN 8 pipe (3/8“ nut), 2m
|  |
| 3093 | DN 12 pipe (1/2“ nut), 4m
|  |
| 4654 | DN 12 pipe (1/2“ nut) 30m roll - price per meter
|  |
| 3094 | DN 16 pipe (3/4“ nut), 4m
|  |
| 4655 | DN 16 pipe (3/4“ nut), 30m - price per meter
|  |
| 3267 | DN 20 pipe (1“ nut), 4m
|  |
| 4656 | DN 20 pipe (1“ nut), 30m - price per meter
|  |
| 3379 | DN 25 pipe (5/4“ nut), 20m
|  |
| 713 | Pipe cutter, DN 8 to DN 20
|  |
| 3659 | DN 8 and DN 20 clamp (3/8“ + 1“)
|  |
| 720 | DN 12 and DN 16 clamp (1/2“ + 3/4“)
|  |
| 3396 | DN 10 and DN 20 clamp (1/2“eko + 1“)
|  |
| 7597 | DN 25 clamp (5/4“)
|  |
| 3430 | Tube template rammer, DN 8 to DN 20 (3/8“ - 1“)
|  |
| 7596 | Tube template rammer, DN 25 (5/4“)
|  |
| 3834 | Tool case (rammer, cutter, DN12+16, 8+20 clamps, 4x10 nuts - 3/8“,1/2“,3/4“,1“)
|  |
| 769 | 3/8“ Nut with gasket, nickel-plated brass
|  |
| 770 | 1/2“ Nut+gasket - nickel-plated brass
|  |
| 771 | 3/4“ Nut+gasket - nickel-plated brass
|  |
| 3343 | 1“ Nut+gasket - nickel-plated brass
|  |
| 3344 | 5/4“ Nut+gasket - nickel-plated brass
|  |
| 5667 | 3/8“ nut gasket for Kombiflex - 8.5x15 mm
|  |
| 5553 | 1/2“ nut gasket for Kombiflex - 11.2x18.5 mm
|  |
| 6840 | 3/4“ nut gasket for Kombiflex DN 12 pipe - 13 x 24 mm
|  |
| 5554 | 3/4“ nut gasket for Kombiflex - 15x24 mm
|  |
| 5668 | 1“ nut gasket for Kombiflex - 18.5x30 mm
|  |
| 6799 | 5/4“ nut gasket for Kombiflex - 25x39 mm
|  |
| 9976 | 3/8“ PTFE nut gasket - 8,5 x 15 mm
|  |
| 9977 | 1/2“ and 1/2“ EKO PTFE nut gasket - 11,2 x 18,5 mm
|  |
| 9978 | 3/4“ PTFE nut gasket - 15 x 24 mm
|  |
| 9979 | 3/4“ PTFE nut gasket for DN 12 tube - 13 x 24 mm
|  |
| 9980 | 1“ PTFE nut gasket - 18,5 x 30 mm
|  |
| 9981 | 5/4“ PTFE nut gasket - 25 x 39 mm
|  |
print ]
