Recooling thermostatic valves

Recooling valves are designed to protect a boiler against overheating in case of a power failure or circulation pump breakdown.

One-way  valves are intended for use in boilers equipped with a recooling heat exchanger. They are designed to be mounted directly on a boiler, either with the sensor immersed in heating water or a capillary type with sensor in a sheath. For pellet boilers a recooling capillary valve for the fuel feeder is available that will prevent pellets to get ignited in the feeder..

Two-way  valves are intended for direct recooling of boiler water without a recooling heat exchanger.

A pressure reducing valve should be fitted at the cold water inlet into the valve that will prevent overpressure in the heating system when the recooling valve opens.


CodeName
8877JBV1 One-way Recooling Thermostatic Valve

for solid fuel boilers with a recooling heat exchanger, 1/2“ M connection to a boiler, 3/4“ M ...

JBV1 One-way Recooling Thermostatic Valve
8066DBV1 Two-way Recooling Thermostatic Valve

for solid fuel boilers with no recooling heat exchanger, connections to boiler, cooling water and ...

DBV1 Two-way Recooling Thermostatic Valve
10113BVTS 1.3 Recooling Thermostatic Valve

1.3 m capillary, 97°C, G 3/4“ F, G 1/2“ M sheath (Danfoss)

BVTS 1.3 Recooling Thermostatic Valve
10114BVTS 4.0 Recooling Thermostatic Valve

4m capillary, 95°C, G 3/4“ F, G 1/2“ M sheath, Danfoss

BVTS 4.0 Recooling Thermostatic Valve
10115BVTS 108 Recooling Thermostatic Valve

1.3m capillary, 108°C, G 3/4“ F, G 1/2“ M sheath placed in fuel feeder, Danfoss

BVTS 108 Recooling Thermostatic Valve
4601STS 20 Recooling Thermostatic Valve

1.3m capillary, 97°C, G3/4“F, G 1/2“ M sheath, Watts

STS 20 Recooling Thermostatic Valve
6609011 Pressure Reducing Valve

Pressure reducing valve, 1 to 4 bar, inlet 15bar max. - 1/2“

9011 Pressure Reducing Valve