Parameters
Label
KPG1 ALC
Units
pcs
Packaging
117x8.3x215 cm
Gross weight
47 kg
Units in bulk packaging
8
Further information
Product Sheet
(PDF 50,4 kB)
Technical Data Sheet
(PDF 274 kB)
Declaration of Conformity
(PDF 121 kB)
Recommended accessories
Mount kit for 1 KPG1 solar collector
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 4 roof anchors (inclined roof) or 2 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 2 KPG1 collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation, straight pipe fittings. Either 6 roof anchors (inclined roof) or 3 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 3 KPG1 collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation, straight pipe fittings. Either 8 roof anchors (inclined roof) or 4 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 4 KPG1 collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation, straight pipe fittings. Either 10 roof anchors (inclined roof) or 5 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount kit for landscape installation of 1 KPG1 solar collector
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 4 roof anchors (inclined roof) or 2 supports and 1 strut (flat roof) shall be ordered for roof mount.
Extension kit for KPG1 Solar Collector
for fixing and connecting 1 collector to an existing collector array
Mount and interconnection kit for 5 KPG1 collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation, straight pipe fittings. Either 12 roof anchors or 6 supports and 1 strut shall be ordered for roof mount, depending on the roof type.
Connection Kit for landscape KPG1 solar collector
Connection kit for one collector - G 3/4“ M inlet elbow, G 3/4“ M outlet cross fitting, sensor sheath and two straight couplers with plug.
Connection Kit for KPC, KPR, KPG and KPH collector array
Connection kit for one collector - G 3/4“ M inlet elbow, G 3/4“ M outlet cross fitting, sensor sheath and two straight couplers with plug.