Parameters
Label
KPS1
Units
pcs
Packaging
111x207x10 cm
Gross weight
39 kg
Further information
KPS1 Solar Collector
1/1
KPS1 Solar Collector for portrait installation, 2037 x 1036 x 90 mm, aperture area 1.91 sqm, fluid volume 1.4 l, output 1481 W, grey aluminium frame, solar prismatic glass, harp type absorber with TiNOx highly selective surface on aluminium sheet, laser welded to copper pipes, connection 4x Cu22
Availability
In stock
Code
16277
Recommended accessories
Mount kit for 1 KPC1+ solar collector
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 4 roof anchors (inclined roof) or 2 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 2 KPC1+ collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 6 roof anchors (inclined roof) or 3 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 3 KPC1+ collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 8 roof anchors (inclined roof) or 4 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 4 KPC1+ collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 10 roof anchors (inclined roof) or 5 supports and 1 strut (flat roof) shall be ordered for roof mount.
Mount and interconnection kit for 5 KPC1+ collectors
Mounting rails, retaining bottom and side clamps, bolts, nuts, insulation. Either 10 roof anchors (inclined roof) or 5 supports and 1 strut (flat roof) shall be ordered for roof mount.
Extension kit for KPS1+ ANT
for fixing and connecting 1 collector to an existing collector array
Connection Kit for KPC, KPR, KPG and KPH collector array
Connection kit for one collector - G 3/4“ M inlet elbow, G 3/4“ M outlet cross fitting, sensor sheath and two straight couplers with plug.