Chemicals, Fluids, Sealants

Every owner expects a long service life of his heating system and its trouble-free operation. Problems are often caused by impurities that may appear even in a new heating system and calcium-rich heating water that produces scale in a boiler heat exchanger.

The best way of preventing such problems is flushing the heating system after installation, checking the heating water quality and adding protective agents. If a boiler heat exchanger or other heating system components are already fouled with impurities or scale, it is usually not necessary to replace the expensive component. Cleaning can be performed using a descaling pump and special chemicals that help in cleaning the spots affected and dissolve scale.

After some time of boiler operation, impurities settle down on the fume side of a heat exchanger. This causes heat transfer deterioration and decreasing the boiler operation efficiency. Cleaning can be performed by using products for cleaning boiler flue gas paths

page: 1
Picture: DOS25/V4V Descaling Circulation Pump
Code: 590
DOS25/V4V Descaling Circulation Pump
flow 56 l/min. max., 10m head, tank volume 20 l
0,0 €
Picture: DOS40 V4V Descaling Circulation Pump
Code: 7786
DOS40 V4V Descaling Circulation Pump
max. flow 70 l/min, 10 m head, tank volume 25 l
0,0 €
Picture: TARTARUGA V4V Descaling Circulation Pump
Code: 5990
TARTARUGA V4V Descaling Circulation Pump
max. flow 18 l/min., 7m head, tank volume 5 l
0,0 €
Picture: Detex
Code: 649
Detex
chemical product for use with descaling pumps, for steel and copper, 10 kg
0,0 €
Picture: Mantex SP
Code: 650
Mantex SP
chemical product for use with descaling pumps, for stainless steel, brass, copper and tin, 1 kg
0,0 €
Picture: Mantex SNO
Code: 2134
Mantex SNO
chemical product for use with descaling pumps, for aluminum, 10 kg container
0,0 €
Picture: N-105 Neutralization Liquid
Code: 4006
N-105 Neutralization Liquid
chemical product for use with descaling pumps, to remove residual acidity, 10 kg container
0,0 €
Picture: MR 501/F Protective fluid for heating systems
Code: 434
MR 501/F Protective fluid for heating systems
1 l bottle
0,0 €
Picture: MR501/P Protective Fluid for systems with plastics
Code: 4402
MR501/P Protective Fluid for systems with plastics
for heating systems with plastic pipes, 1 l bottle
0,0 €
Picture: MR-501/X Cleaner for heating systems
Code: 8781
MR-501/X Cleaner for heating systems
scale remover, 1 l bottle
0,0 €
Picture: MR 501/R Cleaner for heating systems
Code: 433
MR 501/R Cleaner for heating systems
1 kg plastic container
0,0 €
Picture: MR-501/D Cleaner for heating systems
Code: 14685
MR-501/D Cleaner for heating systems
for new systems, 1 l package
0,0 €
Picture: STOP LEAK Sealing Agent for heating systems
Code: 14624
STOP LEAK Sealing Agent for heating systems
1 l bottle
0,0 €
Picture: EPOSTIX Two-Part Epoxy Putty
Code: 10281
EPOSTIX Two-Part Epoxy Putty
50 g, sealant for leaks and holes in piping
0,0 €
Picture: ALU CLEANER A+B
Code: 13249
ALU CLEANER A+B
cleaning of Al combustion chambers in condens. boilers
0,0 €
page: 1