Support Structures

Stainless-steel roof anchor for fixing roof rails, for pantiles

Adjustable aluminium hook for fixing the roof rail for pantiles.

The angle bracket is used on all types of profiled metal roofs. The bracket is screwed into the rafter through the sheet metal roofing and the rail is screwed to it for mounting the PV panels. A gasket between the roofing and the bracket is also included.

Anchoring system with angle bracket using COMBI bolts through the roofing into the wooden rafters (beams). The bolt ensures that the bracket does not lie directly on the roofing.

Anchoring system with angle bracket using COMBI bolts through the roofing into the steel trusses. The bolt ensures that the bracket does not lie directly on the roofing.

Clamp for anchoring on standing seam metal roofs. The angle bracket shall be screwed onto the clamp. The height of the standing seam can be 25 mm max., width up to 8 mm.

Accessory for anchoring angle brackets into shingle roofs. The flashing is placed between the roofing and the angle bracket.

Accessories for anchoring hooks to shingle roofs. The plate is placed with the recess over the part of the hook that is screwed to the rafter.

Triangle support for landscape installation of PV panels. Panel orientation: south with 10°pitch. Middle or end brackets are installed into the groove in the top rail.

Triangle support for landscape installation of PV panels. Panel orientation: south with 10°pitch. Middle or end brackets are installed into the groove in the top rail.

Spacer between 2 rows of panels placed on south-facing supports. Prevents the panels from shielding each other.

for PV panel load-bearing structures on flat roofs