Air Ducts

Flexible hoses in aluminium or plastic are mostly used for air distribution. Ducting can be bent easily so no elbows are needed. These hoses are delivered in one- or two-layer versions, with 25 cm thick insulation. As a NOVELTY we offer flexible, highly resistant PE ducting with antibacterial treatment and 75 mm diameter.

An alternative solution is plastic ducting of 60x200 mm cross section. It is so flat that it can be installed even into constrained ceiling voids or floors. The plastic ducts are rigid so transitions are needed to change the direction or divide the air flow - bends or T-pieces. When installed into an unheated space (attic), additional insulation is needed.

For air inlet and discharge, roof flashings and flue terminals can be used.

:
page: 1
Picture: Flexible Air Duct in HDPE, antibacterial, diam. 75 Flexible Air Duct in HDPE, antibacterial, diam. 75
incl. plugs
Price from 0,0 €
Picture: Thermally insulated anti-bacterial Air Duct, 127 mm x 10 m
Code: 16068
Thermally insulated anti-bacterial Air Duct, 127 mm x 10 m
Saniflex anti-bacterial flexible plastic hose, thermally insulated, 10 m
0,0 €
Picture: Insulated Flexible Aluminium Air Duct Insulated Flexible Aluminium Air Duct
air duct for HRV units
Price from 0,0 €
Picture: Single Layer Aluminium Flexible Air Duct Single Layer Aluminium Flexible Air Duct
air duct for HRV units
Price from 0,0 €
Picture: Round EPP duct 1m Round EPP duct 1m
plastic air duct for HRV units
Price from 0,0 €
Picture: Round EPP duct 0.5m Round EPP duct 0.5m
plastic air duct for HRV units
Price from 0,0 €
Picture: Round Plastic Duct Round Plastic Duct
plastic air duct for HRV units
Price from 0,0 €
Picture: Rectangular plastic duct DN 125, 60x200, 1.5m
Code: 7906
Rectangular plastic duct DN 125, 60x200, 1.5m
air duct for HRV units
0,0 €
Picture: Duct Muffler for diam. 125 air ducts
Code: 16646
Duct Muffler for diam. 125 air ducts
dimensions 175x175x600 mm
0,0 €
Picture: Rectangular coupling, 60x200mm
Code: 7909
Rectangular coupling, 60x200mm
plastic air duct for HRV units
0,0 €
Picture: 45° horizontal elbow, with divisible segments, 60x200mm
Code: 9744
45° horizontal elbow, with divisible segments, 60x200mm
plastic air duct for HRV units
0,0 €
Picture: 90° horizontal elbow, 60x200 mm
Code: 7912
90° horizontal elbow, 60x200 mm
plastic air duct for HRV units
0,0 €
Picture: 45° vertical elbow, 60x200 mm
Code: 18157
45° vertical elbow, 60x200 mm
plastic air duct for HRV units
0,0 €
Picture: 90° vertical elbow, 60x200 mm
Code: 8045
90° vertical elbow, 60x200 mm
plastic air duct for HRV units
0,0 €
Picture: T-piece, 60x200  mm
Code: 7913
T-piece, 60x200 mm
plastic air duct for HRV units
0,0 €
page: 1