Thermostats

Thermostats are intended for switching electric circuits with respect to the temperature measured, in heating applications they typically switch on/off a heat source, maintaining a preset temperature. Thermostats are designed for panel mount (e.g. in a boiler), then their adjustable knob or reset pushbutton is placed on the panel, or for a free installation where the thermostat is placed inside a plastic box that ensures electric protection.

Operating thermostats switch a heat source directly, depending on the temperature set by a knob/screwdriver or at a fixed temperature.

Safety thermostats act as a kind of fuse when the operating thermostat fails. When the threshold temperature is exceeded, the thermostat opens its contacts. As soon as the temperature drops, the contacts will either close again (in models with an automatic reset) or remain open and the appliance needs to be switched on by pressing a reset pushbutton on the thermostat (in the usually used models with a manual reset).

:
:
:
:
°C
page: 1
Picture: Encased adjustable contact thermostat, 10-90°C, heat conducting paste incl.
Code: 10811
Encased adjustable contact thermostat, 10-90°C, heat conducting paste incl.
0,0 €
Picture: Encased adjustable contact thermostat, 17-90°C
Code: 10746
Encased adjustable contact thermostat, 17-90°C
0,0 €
Picture: Encased adjustable contact thermostat, 17-90°C, screwdr.adjustment
Code: 10836
Encased adjustable contact thermostat, 17-90°C, screwdr.adjustment
0,0 €
Picture: Encased adjustable immersion thermostat, 0-90°C
Code: 10781
Encased adjustable immersion thermostat, 0-90°C
0,0 €
Picture: Encased adjustable capillary thermostat, 0-60°C, 1.5 m capillary, IP40
Code: 10750
Encased adjustable capillary thermostat, 0-60°C, 1.5 m capillary, IP40
0,0 €
Picture: Encased adjustable capillary thermostat, 0-90°C, 1.5 m capillary, IP 40
Code: 10772
Encased adjustable capillary thermostat, 0-90°C, 1.5 m capillary, IP 40
0,0 €
Picture: Encased immersion safety thermostat, 100°C, 2 contacts
Code: 10803
Encased immersion safety thermostat, 100°C, 2 contacts
0,0 €
Picture: Double encased adjustable immersion thermostat, 0-60/30-120°C
Code: 10782
Double encased adjustable immersion thermostat, 0-60/30-120°C
Encased immersion thermostat with a sheath, designed to be installed in a tapping.
0,0 €
Picture: Double encased immersion thermostat, 0-90/100°C
Code: 10771
Double encased immersion thermostat, 0-90/100°C
sensors 6.5x100 mm
0,0 €
Picture: Encased adjust. capillary thermostat, 0-300°C, 2 m capillary, INOX sensor
Code: 11514
Encased adjust. capillary thermostat, 0-300°C, 2 m capillary, INOX sensor
0,0 €
Picture: Encased adjustable capillary thermostat, -35/+35°C, 1.5 m capillary, IP40
Code: 11279
Encased adjustable capillary thermostat, -35/+35°C, 1.5 m capillary, IP40
0,0 €
Picture: KP78 Encased thermostat
Code: 12274
KP78 Encased thermostat
30-90°C temperature range, 5-15°C difference, 2m capillary, IP 30, Danfoss
0,0 €
Picture: Encased adjustable immersion thermostat, 0-90°C
Code: 13620
Encased adjustable immersion thermostat, 0-90°C
0,0 €
Picture: Double encased immersion thermostat, 0-90/100°C, Pt1000 sensor
Code: 14105
Double encased immersion thermostat, 0-90/100°C, Pt1000 sensor
Double encased adjustable immersion thermostat with sheath, designed for installation into a tapping.
0,0 €
Picture: Knob-adjustable thermostat, 0-90°C, capillary 0.55m
Code: 10739
Knob-adjustable thermostat, 0-90°C, capillary 0.55m
0,0 €
page: 1